Módem DSL Siemens

What You Need to Know About Siemens DSL Modem

In a world that has been saturated by cable internet providers, DSL still has a place. A variety of DSL modems are on the market, allowing some internet providers to extend service to areas where high-speed broadband connections like cable may not yet be available like more rural settings. Finding the right unit can make a difference in connection speed and all-around accessibility.

Does a Siemens DSL modem require an installation disk?

It does not. Plug in the modem and ensure it is on. Use your computer to set up the device using your internet provider's instructions. If you don't have these instructions, your internet provider can walk you through network setup. Also, the provider may need to register the unit's serial number so it will work on their system.

What power cord does a Siemens SpeedStream 5100 use?

Like most Siemens DSL modems, the power supply is a 12-volt DC 700mA. The tip is female or "negative." It's important to use the right power supply so the unit receives adequate electrical flow, otherwise, the modem could be damaged.

Do Siemens DSL modems have Ethernet ports?

You are likely to find a unit with one or more Ethernet ports, especially updated models. SpeedStream, Speedport, and Gigaset models are among those that have built-in Ethernet ports.

Do you need a router in addition to a modem?

There are times when the unit doesn't double as a router. It depends on the unit. If the unit is a modem only, then a separate router can be purchased to connect to the modem. However, you may wish to connect your computer directly to the modem, which means wireless capabilities aren't needed.

How do you connect a router to a DSL modem?

To begin the process of connecting a router to your modem, first connect the modem to your computer with an Ethernet cable. You may be given a specific IP address that will open a settings page for the modem. You will use your username and password to log into the modem's GUI. If you don't know your login, you can call your internet provider to obtain it. If you've never set one up, then you will need to do so. Your internet service provider can walk you through this process, which may include your WAN settings being set to "Auto Select." Next, do the following:

  • Unplug the Ethernet cable from the modem and into one of the router's LAN ports.
  • Open the router software.
  • When choosing how the router connects, PPPoE may be the most common method, which requires your login credentials that you used when setting up the modem.
  • Enter the login credentials.
  • Give your network a name and click the Save or Update button.
Content provided for informational purposes only. eBay is not affiliated with or endorsed by Siemens.

Categorías