Automóvil y Camión KYB Shocks and Struts

KYB Car & Truck Shocks & Struts

The shock absorbers in your car serve two purposes. They keep the tires in constant contact with the ground, and they control the movement of the springs and suspension. Originally called Kayaba Research Center, KYB has been manufacturing suspension systems in Japan since 1919.

The 343460 shocks by KYB are made for 2006 to 2011 Honda Civic cars. These units fit DX, EX, EX-LX, GX, and Hybrid trims. You can also use 343460 shocks with an SI or Sports trim.

KYB makes 363010 and 343140 struts and shocks for 1981 to 1985 Mazda RX-7 cars. These are direct replacements for HZ1069 struts and shocks. You can use 363010 and 343140 products with any Mazda RX-7, and the components that manage suspension operate effectively with traditional motors and turbo engines.

Worn shocks make it difficult to control your vehicle and shorten its useful life. As the shocks lose their ability to resist wheel and body movement, the driver will have to increasingly compensate for nosediving and body control, both of which conspire to increase quick-stopping distances. As the shocks start to wear, everything that connects to them (bushings, joints, wheel alignment, support arms, and suspension wings) become subjected to additional jolts and jiggles, so consequently, they will also wear out sooner.

There are four conditions under which you should change your shock absorbers:

• Upgrade: Do this when you want to improve your cars handling and control.
• Maintenance: To keep your vehicle running smoothly for longer and prolong its life span, KYB recommends changing shocks and struts after 50,000 miles.
• Restoration: If your car starts to nosedive or become hard to control, replace your shocks before they trash the rest of your suspension system.
• Repair: Damaged shocks and struts can cause tire cupping or serious leaking. The parts have failed and need to be replaced ASAP.

Automotive KYB 340056 X 2 struts and shocks are built for 2005 to 2012 Acura vehicles. The measurements for these units suit base trim Acura RL automobiles. These components can be installed on the left, right, front, or rear of an Acura vehicle. Companies that manufacture 340056 X 2 hardware implement tactical procedures. This is to ensure that each component in the bundle matches or exceeds OEM standards.